Search results

Question, what all is involved with changing out the lower steering column bearing? Mine is original and believe that is the cause of the clunk every now and then when turning? And it looks like it’s separated some? Where’s the best place to get it also? Thanks in advance

What do I need to get or use to bond the hood back to the structure underneath the hood skin? The original stuff is still there it’s just released from the hood skin but attached to the hood bracing and all is just the center section above the air cleaner. The car is painted on outside with real...

Raining here today so staying in garage. Need a day to just chill. Helped my buddy yesterday on his 63 corvair turbo and been busy days at the house after work this week.

It was aggravating because it is a simple but it’s got the full run down and now 100%! About to order a new set of wheels I think and even considering jumping up to the 12 inch rotors and get the caliper brackets for them? But plan on login some miles in it.

Well weeks later and besides all the other issues along the way I found it ended up being a front caliper bleeder that was the air in the system issue. Thing would not seal up even with new bleeder. So got a new caliper a few weeks ago and bleed them and been good since. Never had a bleeder that...

Should be sorted out. Will see how it goes.

Well I got the 80 master cylinder just had to bore out the mount holes so it would fit. Bleed the master and installed it. Tried to bleed it for a few days but kept getting air. Got a set of plugs for the master and pulled the proportioning valve and went through it. There was a small piece of...

Found out it was a kit from CPP. Waiting to hear back from them to verify what master cylinder I will need. Also confirmed it has the 11 inch discs.

Thanks. I’ll look at Mancini

Looked for part number. Only thing I saw was a P on the front and SAMYCO on the underside

From what I think it might have come from is a late 70’s early 80’s van?

Anyone recognize this brake master cylinder setup? Having some issues from it and need to replace or repair it. Years ago Dad had someone convert from Drums to disc in the front. Both lines from the master to the proportioning valve are the same size. Front rotors measurements are about 10 1/2...

Got everything sorted out. Took grandson; wife and her dog for a ride Saturday. Everything went well. Only had to talk to 3 different guys in traffic. Even saw someone in a 70 convertible runner.

Just need to get the brakes bleed and should be back to pounding the pavement!

Ended up ordering it from year one but had a 25% off coupon also. It was a M&H harness.

Well got the harness on Friday so installed it Saturday and all the light issues seem to be resolved. Got it all put back together. Finished up today. Still need to get the brakes bleed to go get a test drive.

New harness should be here Monday.

Thanks all. Got a good buddy who’s a really good electrician and going to get his opinion but I think it’s time for a new front lights harness. That was a bad day but to all worked out. I needed new paint on the roof and trunk so it needed paint just got it early. Good thing about it that was...

Well I think I found it. Disconnected it at the firewall and got the rear lights all to work. The front lights harness has some issues. Looks like there’s a few spots for the headlight harness for the left low beam. Then it is giving different ohms reading each time I check it. I’m sure that...

That was a bad day! I got a concussion and broken heart for a while. The lady that hit me was fine. Totaled her car that day. Will verify nothing is pinched with the column again.