Strippers ?

[69383RR]

Going to start working on the Charger soon and was thinking about chemical stripping instead of sanding by hand . either way its going to be a mess but I thought I would give it a try . Any recommendations on maybe something not so toxic / deadly but still effective ?

 

[george68hemirr]

thought you were talking about slutty strippers

 

[69383RR]

Got to get your attention anyway I can ! :acme:

 

[Rawone]

Media Blast?

 

[Tempest 455]

I used something like this once. Worked well. Use gloves!

http://www.summitracing.com/parts/rll-255447?seid=srese1&gclid=CNbRjounobsCFQbl7AodYigAYg

 

[jays69bird]

I used something like this once. Worked well. Use gloves!

http://www.summitracing.com/parts/rll-255447?seid=srese1&gclid=CNbRjounobsCFQbl7AodYigAYg

I used that one on my aluminum boat,it worked still needed a lot of elbow grease.

 

[modernistsouth]

Try Peel Away 7- http://www.dumondchemicals.com/pro-peel-away-7.html

Basically, it's any stripper that contains methylene chloride that you want to avoid. Supposedly, SOY-gel works too, but I haven't tried it.

 

[69383RR]

I heard that the aircraft stuff works well but you have to be extra careful with it because its so strong . Never heard of peel away but looks promising . I would farm it out to be media blasted if we had something like that around but we don't .

 

[Photon440]

I've used the aircraft stuff, both brush on and aerosol cans, great results. But I keep away from cracks and pinch welds where it's hard to be sure you've rinsed all traces of it away. Cooler weather is better so it has a chance to penetrate the paint before drying up.