Rocket
Well-Known Member
- Joined
- Jul 1, 2010
- Messages
- 288
- Reaction score
- 6
Hey guys been making a ton of progress on my Road Runner. Had it pretty much road worthy and decided to install some disc brakes. The donor car had a brand new 4:10 third member , SSBC brakes and a bunch of other odds and ends I have been thankful to glean.
My question is has anyone installed the SSBC 156 kit only to realize that the caliper hits the sway bar on full steer? I called SSBC and they said it wouldn't but it did so I decided to replace my ball joints and swap right spindle,for left and vice versa. Got that all done and was wondering if anyone else did this.
I need a recommendation on what specific line you used or advice on how to go about calculating what I need. If I were mad max I could probably get away with using the one that it came with but it touches the lower control arm and I don't like it.
Any advice or part recommendations would be great.
I also need the brake line that goes from the left front wheel to the distribution block ( wrong name but I'm too tired to look up the name) and one of the lines to the block from the master cylinder. All the places I looked at had whole front kits and I already have half the kit.
Thanks guys. I'll post some pics ASAP.
John
My question is has anyone installed the SSBC 156 kit only to realize that the caliper hits the sway bar on full steer? I called SSBC and they said it wouldn't but it did so I decided to replace my ball joints and swap right spindle,for left and vice versa. Got that all done and was wondering if anyone else did this.
I need a recommendation on what specific line you used or advice on how to go about calculating what I need. If I were mad max I could probably get away with using the one that it came with but it touches the lower control arm and I don't like it.
Any advice or part recommendations would be great.
I also need the brake line that goes from the left front wheel to the distribution block ( wrong name but I'm too tired to look up the name) and one of the lines to the block from the master cylinder. All the places I looked at had whole front kits and I already have half the kit.
Thanks guys. I'll post some pics ASAP.
John