Rim Measurements

[75RDRNR]

Is it possible the bolt pattern and backspacing could have the same measurement? For my bolt pattern I got 5x 4 1/2 and for backspacing, I got 4 1/2.
As you can probably tell, I have never ordered rims before. Thanks for the assist

 

[droptop]

Yes that is your correct bolt pattern and 4.5” backspace sounds about right for a 7-8” wheel.

 

[75RDRNR]

Last question on this thread, then I'm putting it to bed. Will a 17x8 wheel with a 4-1/2" backspace and a 4.5 bolt pattern fit?

 

[droptop]

Last question on this thread, then I'm putting it to bed. Will a 17x8 wheel with a 4-1/2" backspace and a 4.5 bolt pattern fit?

Should not be an issue on the rear, but might have problems on the front depending on tire size. Interested in something like this?

 

[75RDRNR]

The ones I found were the Mopar Rallye Rims. I'm wanting to get back to the original look. The tires I found were 245/45-17. What would be the possible issue with the fronts?

 

[75RDRNR]

The ones I found were the Mopar Rallye Rims. I'm wanting to get back to the original look. The tires I found were 245/45-17. What would be the possible issue with the fronts?

You think 17x8 in the front would be good?

 

[droptop]

Depends on tire size. I had a 245/40/18 on front without issues other than the ride quality was absolutely horrible.

 

[75RDRNR]

In your opinion, if I put the 17x8 on the rears, what would you put on the front?

 

[quikbird]

Put 17 x 9 or 10 on rear and the 8’s on the front

 

[75RDRNR]

so 17x8 would fit on the front w/o issues?

 

[quikbird]

have had no issues with them

 

[75RDRNR]

have had no issues with them

Your bird was on the Satellite platform and mine is off the Fury. Since there both B-bodies, they should be similar correct? So what works on yours, should work on mine?

 

[quikbird]

In my opinion and I may be wrong it should be ok