Motor mounts

[jerrysdustydog]

Looks like I got the shaft again from the previous owner, only have one motor mount (passenger I think) with the parts for the 68 RR. My question is, I know you can but the mount insulator with the bottom part, but is the upper bracket that bolts onto the block available?

 

[Basketcase]

I might have some, let me know.

 

[1967 'cuda]

I have a friend with several sets stockpiled. If you need, I can check with him too.

 

[jerrysdustydog]

I do need them, at least the uppers, if you could get me a price. Thanks!

 

[1967 'cuda]

I called that buddy of mine today and he told me he wants $60 for a full set for both sides. - Or $30 for one side.

 

[Basketcase]

no luck here.

 

[jerrysdustydog]

Thanks 1967 'Cuda, sent you a PM!

 

[1967 'cuda]

I cleaned it up a bit and spritzed a little gloss black on it for you. After it dries a little, I'll get it to the post office.

 

[jerrysdustydog]

Awesome, I could have cleaned it up and painted it!

 

[MsBeep]

Awesome, I could have cleaned it up and painted it!

Coulda...but now you don't have to! 1967 'Cuda: you are awesome!:congratulatory:

 

[1967 'cuda]

According to my research the motor mount that has the tube running through it should be for the driver's side. I think you may need the passenger side Jerry.



I pulled this picture off of the Moparts forum. This is what the caption says:

1967-1968-1969 A-body 383 and 69 440 A-body passenger side steel engine mounting bracket is the one with out the tube(SHOWN IN PICTURE ON THE LEFT)....the rubber mount is the one that is same as any B/E body V8, that the long thru the k-frame&insulator bolt goes thru...

 

[jerrysdustydog]

Thanks John for the info, while your at it can you find me some throttle parts as well? Every thing except the part that bolts onto the engine, I have that. Just kidding, I need to research what I am missing first.

 

[1967 'cuda]

Jerry here's some pics of that second motor mount. Like the first one, the rubber is in great shape on this one too.

 

[1967 'cuda]

Jerry I've got that second motor mount boxed and it will be in the mail Monday. Let me know whatever else you may need. I mentioned the windshield clips to my buddy and he's pretty sure he'd have them. - But we're still unsure which clips it is that you needed.

 

[69hemibeep]

Its going to take awhile, all they got in Williams is pony express

 

[jerrysdustydog]

These were the clips I was referring to:
http://www.69roadrunner.net/mopar/attachment.php?attachmentid=5358&d=1393984820

 

[1967 'cuda]

These were the clips I was referring to:
http://www.69roadrunner.net/mopar/attachment.php?attachmentid=5358&d=1393984820

got em. - & have access to several bell housings. My buddy said is wondering why that 2892260 casting #. According to his books, 2892257 & 2892262 were also used on the '68 Roadrunners and he believes those are identical (except for the #)

 

[jerrysdustydog]

You're the man John! Thanks again!!!

 

[1967 'cuda]

Hey Jerry, Don't thank me. If you ever run into the guy supplying your parts, he's the one to thank. He's a good guy and he's got a lot of stuff. He keeps a low profile to prevent people from robbing his parts. I'm just a go fer.

 

[1967 'cuda]

Jerry, I picked up the other parts that you needed today. I'll still have to get them weighed and get a shipping quote.

The windshield clips. - Look like new.



The bellhousing.