• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

I need a power steering conversion kit for a 68 hemi....Where can i get one that is a complete assembly??? Please Help

Sammy Buchanan

Fall Back to my Youth
Joined
Sep 15, 2018
Messages
175
Reaction score
85
Location
New Johnsonville Tn
I need a complete power steering conversion kit that has everything needed to do the change over from Manuel to power....Where do I turn....Thanks
 

69hemibeep

Sponge Bob Square Wheels
Joined
Sep 10, 2008
Messages
22,217
Reaction score
2,455
Location
AZ Desert,
One, I don't know of any stock kit. Two, If you are after the true factory look you need a steering box, pitman arm, steering column, the pump, pully's and brackets are different than the 383, I belive the hemi had a cooler also. Three, Aftermarket there is Borgeson they have kits or an electric conversion.
I figure my manual steering with an elephant setting on top of it good exercise LOL
 

Russ69Runner

Well-Known Member
Joined
Aug 4, 2016
Messages
7,787
Reaction score
3,337
Location
Lake Wales Fl.
After looking looks like Borgeson has everything you need. Have you considered the different ratio gear box that is being sold to make manual easier to use. Good luck on the swap.
 

Sammy Buchanan

Fall Back to my Youth
Joined
Sep 15, 2018
Messages
175
Reaction score
85
Location
New Johnsonville Tn
One, I don't know of any stock kit. Two, If you are after the true factory look you need a steering box, pitman arm, steering column, the pump, pully's and brackets are different than the 383, I belive the hemi had a cooler also. Three, Aftermarket there is Borgeson they have kits or an electric conversion.
I figure my manual steering with an elephant setting on top of it good exercise LOL
 

jww69rrpost

Well-Known Member
Joined
Jun 27, 2018
Messages
103
Reaction score
142
I have a Borgeson steering box that bolts right in; an Ididit tilt steering column; belt driven power steering mounted directly behind the AC compressor. You can get all this as a kit or piece it together. With exception of the steering box and column, I went the kit route to be sure everything fit. There were a few challenges along the way getting the steering column to fit the steering box.

Engine - 3.jpg
 

jww69rrpost

Well-Known Member
Joined
Jun 27, 2018
Messages
103
Reaction score
142
Correction to my recent post. The power steering setup is mounted immediately below and next to the AC compressor (I've attached same photo for clarification).

Engine - 3.jpg
 
Back
Top