• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Hood inner structure bonding epoxy?

cj69RR

Well-Known Member
Joined
Jun 23, 2012
Messages
778
Reaction score
55
Location
Fleming Island, Fl.
What do I need to get or use to bond the hood back to the structure underneath the hood skin? The original stuff is still there it’s just released from the hood skin but attached to the hood bracing and all is just the center section above the air cleaner. The car is painted on outside with real nice paint so don’t want to damage that. Thanks in advance.
 

Ranger

Well-Known Member
Joined
Dec 25, 2014
Messages
1,462
Reaction score
249
Location
Woodstock ll
I would bet that a tube of clear 100% silicone caulk would also do the job quite well.

I used it under the bezel to attach the radio antenna to the fender when I installed a universal antenna, but the OEM mount would not adapt. Worked great and solid as a rock.

Road Runner Antenna.jpg
 
Last edited:
Back
Top