• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Engine Oil opinions

Bill Monk

Well-Known Member
Joined
Feb 28, 2017
Messages
111
Reaction score
13
Location
Dunbar, WV
Title says it all. What is everybody using in our engines? I know Lucas has a muscle car oil that supposedly has more zinc for the flat tappet engines but of course everybody says theirs is the best. Conventional vs Synthetic, you get the idea. Comp cams also recommends using their break in additive at every oil change so what's your opinions on that as well.
 

69hemibeep

Sponge Bob Square Wheels
Joined
Sep 10, 2008
Messages
22,217
Reaction score
2,457
Location
AZ Desert,
When they first stared removing the zinc and phosphorus I bought a bunch of red bottled STP which is high in the stuff so I substitute any good brand of 10-30 with a bottle of STP its less than a half a quart
 

Bill Monk

Well-Known Member
Joined
Feb 28, 2017
Messages
111
Reaction score
13
Location
Dunbar, WV
When they first stared removing the zinc and phosphorus I bought a bunch of red bottled STP which is high in the stuff so I substitute any good brand of 10-30 with a bottle of STP its less than a half a quart

That's the thought on the comp cams stuff, I may just go that way
 

69hemibeep

Sponge Bob Square Wheels
Joined
Sep 10, 2008
Messages
22,217
Reaction score
2,457
Location
AZ Desert,
We should be hearing about Amsoil and Lucas soon. There are lot's of ways to go but the diesel oils have reduced zinc and phosphorus now.
 

Russ69Runner

Well-Known Member
Joined
Aug 4, 2016
Messages
7,787
Reaction score
3,337
Location
Lake Wales Fl.
Mobile one is what I am using in my motor. Like Shell Rotella for my diesel truck's and have used the straight 30 in my quad runner. But my race car buddy's say Mobile one is the way to go. Any thing but Quaker State. Well hope this help's. Just remember some oil is better than none when It low on the road till you can get the right type and change the oil. I always have a couple of quart's in my vehicle of what I use. Russ. :blah:
 

69hemibeep

Sponge Bob Square Wheels
Joined
Sep 10, 2008
Messages
22,217
Reaction score
2,457
Location
AZ Desert,
I like the Carter RV pump it is self regulated carburetor use 7-9 psi something like that.
 

ACME A12

Plaid Sport Coat Wearing Moderator
Staff member
Joined
Nov 4, 2008
Messages
13,694
Reaction score
857
Location
New Port Richey, FL
I've been buying the Brad Penn 20W50 lately...

Always like to throw in a bottle of the Lucas ZDDP additive on my engines with flat tappets... I don't worry about it on the rollers.
 

CompSyn

Well-Known Member
Joined
Jun 18, 2010
Messages
255
Reaction score
42
Location
Lewiston, Idaho USA
Back in the day...

During the 1950s and 60s and 70s, API set Zinc recommendations at 1000-1200ppm, e.g., API SC, SD, SE

Currently, Shell Rotella T Triple 10W-30 still has a Muscle Car era dose of Zinc at 1225ppm. IMO, additizing past that is unnecessary.

August 2016 Rotella 10W-30 test: http://pqiadata.org/ShellRotellaT10W30.html

However, if I were going to lose sleep that Shell might change the Zinc level without warning, I'd simply double check the Zinc by sending it off for my own oil analysis. This because I'm not a huge proponent of using aftermarket oil additives.

Reference:

 

CompSyn

Well-Known Member
Joined
Jun 18, 2010
Messages
255
Reaction score
42
Location
Lewiston, Idaho USA
New Shell Rotella T5 10W-30 API CK-4

Here's a fresh off the press oil analysis of Shell Rotella T5 10W-30. It's the latest API service classification (CK-4) and still has a healthy dose of ZDDP.

Images posted below...

OIL: Shell Rotella T5 10W-30 ***API CK-4***
LAB: POLARIS Laboratories
MILES IN USE----------0
MILES------------------0
MANUFACTURE DATE:---3/07/17
PURCHASE DATE:-------3/28/17
SAMPLE DATE:----------3/31/17
TESTED DATE:----------4/11/17

WEAR METALS (PPM)

IRON-------------1
CHROMIUM------0
NICKEL-----------0
ALUMINUM------0
COPPER----------0
LEAD------------0
TIN--------------0
CADMIUM-------0
SILVER----------0
VANADIUM------0

CONTAMINANT METALS (PPM)

SILICON-------5
SODIUM-------2
POTASSIUM----5

MULTI-SOURCE METALS (PPM)

TITANIUM-----------0
MOLYBDENUM------1
ANTIMONY----------0
MANGANESE-------0
LITHIUM------------0
BORON-----------204

ADDITIVE METALS (PPM)

MAGNESIUM----------10
CALCIUM-----------2237
BARIUM----------------0
PHOSPHORUS-----1020
ZINC---------------1167

CONTAMINANTS

FUEL DILUTION-----0
SOOT-------------0
WATER------------(<.1)

FLUID PROPERTIES

cSt @ 100ºC----------12.2
TBN--------------------8.09
OXIDATION-------------13
NITRATION--------------5

Shell Rotella T5 Synthetic Blend SAE 10W-30 Triple Protection Plus
DSC03237_zpsfy6yg3wb.gif

API Service CK-4

DSC03235_zpsfboudf98.gif

Manufacture date code 03/07/2017
DSC03233_zpswrz3jr90.gif

Date of purchase 03/28/2017
Rotella_T5_CK-4.1jpg_zpsnjk7sfh5.gif

Oil Analyzers Inc., private label program via POLARIS Laboratories - ISO 17025 A2LA Accredited
Click to enlarge image.
th_OAI_Shell_T5_VOA.1png_zpsuuixuird.gif
 
Back
Top