• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Driver’s Vent box attachment

WWheeler

Well-Known Member
Joined
Mar 7, 2019
Messages
160
Reaction score
123
Location
Dallas
Wanting to confirm what three nuts to use to attach the drivers vent box to the cowl. The ones I have are the stamped metal “speed nuts”. Is that correct?

Thanks.
 

ACME A12

Plaid Sport Coat Wearing Moderator
Staff member
Joined
Nov 4, 2008
Messages
13,694
Reaction score
857
Location
New Port Richey, FL
Thanks, Bob. I was going to volunteer to go out to the garage and look if someone didn't chime in shortly. Just couldn't remember off the top of my head... CRS kicking in again...
:D
 

WWheeler

Well-Known Member
Joined
Mar 7, 2019
Messages
160
Reaction score
123
Location
Dallas
Thanks guys. I was pretty sure that was what was used. Seems pretty Cheepo considering they are threaded studs and could use a regular hex nut. Most of those nuts are used on pot metal and plastic studs and they make their own threads. Not sure why they used these here other than cost.
 
Back
Top