Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Got my car back from a 1/4 panel replacement and noticed the gap ,I think it should be in line with rear inner panel like my other side.
Can anyone check on there car which door/ body gap is correct.Thanks in advanced.
Mine is tight in the same place. Wish I had ground off that tit. on the quarter and welded it up. But after all Hine sight not good. More gap on the hinge pillar due to door swing. Really tight on the latch panel area.
Here is my 70, original paint, no body damage. The gaps are very loose on this car, the drivers door is over 1/4”, maybe more like 3/8”. Doors open and close just like they should.
I did buy aftermarket doors. They may not be the same as the original one's as far as the fitting on the car. Did have to neural my hinges. Where the bolts hold it to the hinge pillar to slide the door forward. But that being said did replace the hinge pillar post on both sides. Think when they put the welded nuts on the post, they were off.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.