• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

CORRECT TIMING FOR A 68 HEMI 4 SPD RR

Sammy Buchanan

Fall Back to my Youth
Joined
Sep 15, 2018
Messages
175
Reaction score
85
Location
New Johnsonville Tn
Trying to set my timing back to factory settings.....Help please. Whats the best kind of timing light to buy,...inductive or digital? Oyea...What does the hot idel need to be ? THANKS ABUNCH !!!!
 

robertop

Well-Known Member
Joined
Mar 23, 2009
Messages
48
Reaction score
5
Trying to set my timing back to factory settings.....Help please. Whats the best kind of timing light to buy,...inductive or digital? Oyea...What does the hot idel need to be ? THANKS ABUNCH !!!!
on my 69 Hemi the specs are: with the vacuum advance line disconnected and plugged, at idle the setting is 12.5 degrees of advance. Now as far as what unit to buy, I got mine at Napa and it has an adjustable zero setting for ease of reading, and I think it's of the inductive type. Look for a slim unit, so you can snake it where you can easily read the mark.
 

Sammy Buchanan

Fall Back to my Youth
Joined
Sep 15, 2018
Messages
175
Reaction score
85
Location
New Johnsonville Tn
on my 69 Hemi the specs are: with the vacuum advance line disconnected and plugged, at idle the setting is 12.5 degrees of advance. Now as far as what unit to buy, I got mine at Napa and it has an adjustable zero setting for ease of reading, and I think it's of the inductive type. Look for a slim unit, so you can snake it where you can easily read the mark.
Thank You !!!
 

69hemibeep

Sponge Bob Square Wheels
Joined
Sep 10, 2008
Messages
22,217
Reaction score
2,455
Location
AZ Desert,
For both 68 and 69 with the vacuum plugged it is TDC or zero. That being said they don't run worth a crap so do what Sammy said
 

Russ69Runner

Well-Known Member
Joined
Aug 4, 2016
Messages
7,787
Reaction score
3,337
Location
Lake Wales Fl.
I have used the formula and timing light's. Now this the old way that I was shown. Loosen the distributor with the motor running advance it till the motor speeds up. Now back it down till it start's to shudder. Then advance it till it smooth's out. Tighten the bolt so the distributor dose not move and check the timing mark again. See if that is close to what it should be. It work's for me.
 
Back
Top