Air grabber

[Bobby Cunningham]

does any one make the boot for the air grabber power brakes booster for a hemi

 

[cbusters]

Are you referring to the boot on the actuator rod at the firewall bracket?

 

[Bobby Cunningham]

On the cut out on the bottom of air grabber assembly for brake booster to clear

 

[cbusters]

Sorry, can't help with that.

 

[69hemibeep]

Like this one. They came on all of the Hemi's manual and power and I don't know why. As far as a source? As luck would have it mine was in good shape

 

[Bobby Cunningham]

Could I get some measurements and pictures of the cut out

 

[droptop]

Someone reproduced this item several years ago. There may still be some out there. Try BE&A or Layson's.

 

[Bobby Cunningham]

B/E and A has them listed are they a frame around it or just the boot and thanks for the information

 

[69hemibeep]

Its one piece and riveted into the air grabber

 

[Bobby Cunningham]

Having no luck finding this pcs any ideas

 

[69hemibeep]

Try MMC Detroit they might know

 

[ricks_RR]

goggle air grabbers restoration ( don hall ) give him a call he did my air grabber for my road runner he may know what you need

 

[Bobby Cunningham]

Ok

 

[A12]

Like this one. They came on all of the Hemi's manual and power and I don't know why. As far as a source? As luck would have it mine was in good shapeView attachment 25145

The Hemi brake master cylinder (and vacuum booster) is actually set higher and I think a little to the left (driver's side) away from the BIG HEMI HEADS. I have a couple of photos of power brake booster and master cylinders on 383/440 cars that shows them mounted lower and more centered. Wonder if the brake rod is at an angle under the dash from the brake pedal??????????

 

[A12]

440 GTX '69 with PB booster below the firewall to cowl seam.

 

[A12]

'69 Hemi (survivor) RR with PB booster above the firewall/cowl seam, that's why I think the air grabber cutout is necessary on the Hemi for head and exhaust manifold clearance.