• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

In need of Fuel and Brake routing diagrams

Collin

Well-Known Member
Joined
Jul 17, 2009
Messages
876
Reaction score
5
Due to some frame repairs the factory Clip holes need to be re-drilled. Can someone please post a routing diagram with hardware for the brake lines (manual drums) and for the 5/16" fuel lines from tank to carb. Any diagram or pictures would help.

Thank you!
 

Basketcase

Keeper of the Green
Joined
Sep 10, 2008
Messages
14,415
Reaction score
300
have you checked the tech section for the factory service manual ('69)?
 

69hemibeep

Sponge Bob Square Wheels
Joined
Sep 10, 2008
Messages
22,229
Reaction score
2,466
Location
AZ Desert,
I have pictures Collin the brake lines would be the same and the 3/8 line with return follows the same path as yours to the fuel pump. It was undercoated so it's ugly to look at if that will help.
 

Rapid Transit

Just A Traveler In Time
Joined
Feb 9, 2015
Messages
471
Reaction score
458
Location
Georgia
No promises. But this weekend I'll be moving my unmolested 69 and will try and get some pictures underneath it.
I need them for documentation anyway. It will be a little dirty and rusty.
 

Collin

Well-Known Member
Joined
Jul 17, 2009
Messages
876
Reaction score
5
Thanks everyone. I searched through some old pics on here. My vent line runs in the trunk. I have several clips in the kit and an"extra" bolt style clip. Just trying to make sure everything is in its proper place
 

Rapid Transit

Just A Traveler In Time
Joined
Feb 9, 2015
Messages
471
Reaction score
458
Location
Georgia
I took some pictures this weekend under the car. But I don't know if they are what you need. And uploading is a PITA. I keep having to search for the folder. It doesn't go right back to it to upload more than one picture.
 

Collin

Well-Known Member
Joined
Jul 17, 2009
Messages
876
Reaction score
5
Understandable. I just hate having extra hardware and guessing where the holes should be on the frame rail. Thanks for the input, I know uploading pics is a PITA lol. It's 5 degrees out and up to -20 wind chills... The car can wait
 
Back
Top