Search results

I looked back through to see if there was a post on what motor mounts you guys are using. I could not find anything. Mabey I didn't go back far enough. I looked at different mounts, I also bought a set of OEM from the auto parts. After comparing them to my old set I returned them. I also looked...

Now that is what I call PRICELESS.

If the Velcro holds the cardboard to the pillar is there anything that holds the liner to the cardboard. Also what is the difference in length between a 68 and 69 liner. I bought mine several years ago so I have not opened it yet.

Hi 1968 man. I think I will make a new set. You said 4 Velcro patches on them. Do you know where they were located? My OEMs are in good shape but the points are soft. They will work good for a pattern.

Thanks 69hemibeep.

My daughter needs to show me how to get the pics from my phone to computer then I can post pics,LOL. Your friend Big Mo

Wow, what a post. I hope you can drive that bird for many wears. You most definitely have earned it, from Big Mo.

I started putting insulation on floor today. Got done up about half to front started at rear. I used the foam with foil like on both sides that Lowe's sells by the roll. Hope it helps keep some heat out of car.

Hi 1968 man, I guess my next question is I don't have the front suspension on the car. I will put that in with k frame and motor. Can I bleed the mc now or does it all need hooked up?

I looked at my cardboard sail panels and they have a small curve in them. Is this the way they are made or did they get that way after years in the car as they look OEM. I could easy make a pair but was wondering about the curve.

I got my tail pipes out and took a look at them. I had my local shop make a set not long before I started the rebuild 2001. They have been laying in my shop and have surface rust. I don't know if I should clean them or not. They will just rust again when back on the road. john I know how those...

I really like the 8 track. I just got rid of my tapes a couple years back.

Hi 69hemibeep Big Mo here. After you wire the dash before swinging up into place did you power up the dash what you can to check any of the wire circuits. I have checked the harnesses as I put them in and they all work. I now know that part of the circuit is ok.

Russ I looked at the rear bow with the wires you ask about. My roof has indentations where the bows go. They are about 1-1/2" wide. The wire on my rear bow holds the bow in the center of that indentation. Don't know if that will help you or not Big Mo

Thanks Russ I will look and see if I have them or need them. You know how that goes.

That is what I have also is cardboard. I think mine are ok no tears, nothing broke so I think I will reuse them.

Anyone know anything about bench bleeding a master cylinder. I have mine installed in car but can take it out if I have to. If I need to bleed it what is the procedure to bleed it.

Good luck. I am getting ready to put my dash in Monday. I put the grill assembly in today but will take it out so it does not get damaged when I put the engine in. I cannot get another one. I need the dash in then I can work on wiring.

I am not sure what clips you are referring to. Maybe I will need them.

Did you put it in or have it put in. It really looks great. I still have to put mine in.